1.2 Metre Slimline Aerodynamic AVT Recovery Amber LED Lightbar 12v with Digital Controller
The new AVT 1220 SL Model Lightbar brings you the Latest High Power LED technology in a low profile Compact Modular design with a tough aluminium chassis.
The 1220SL 1200mm LED Lightbar is constructed of multi-section, clear, UV stable polycarbonate lenses sat on top of an aluminium extrusion creating a lightweight, modular and easily serviceable roof top lightbar.
This lightbar features a in cab switch operated dash mount controller allowing you to select 15 different flash patterns and directional signalling. The unit features in-built memory allowing the user to select the preferred pattern for every day use. You can also switch off the rear array of LEDs seperately so as not to blind drivers behind you.
3w TIR Total Internal Reflector LED modules that creates maximum light output with 360º vision with no blind spots
The bar features two heavy duty steel feet with 4 rubber bushed mounts. To install, simply drill 4 holes that line up witht the feet holes, one hole for the main power cable, and use suitable length bolts (not included) to bolt your lightbar to your roof skin.
The in-cab controller can be mounted anywhere inside your vehicle.
Due to LEDs having low power consumption the lightbar can be left running without flattening the battery on the vehicle.
Specification
Make: AVT
Lens: Clear Lens High Powered Amber 4k Ultra Brite 3w LED’s
TIR (Total Internal Reflector)
Voltage: 12v / 24v - Dual Voltage
Current: 5A Peak
Fitting: 4 Bolt Mount
Flash Pattern: 15 Flash Patterns / Front and Rear Shut off, visual indicator
Certificates: EMC Approved (ECE R10), IP67, CE marked
Dimensions: 1200mm (L) 110mm (H) x 300mm (W)
Warranty: 2 years
IP56 Rated
Parts Supplied:
1x Lightbar
2x Steel legs
4x Rubber Mounts
1x Dash Controller
3.5m main loom
Installation:
Thick Red cable - Power supply to main lightbar - 12v / 24v (To a switched supply)
Thick black cable - Earth to main lightbar - Earth
Supplied with 3.5 meters of shielded power cable
Cabin controller plugs into the 3.5m loom via short cable
Dimensions : 1200mm (L) 110mm (H) x 300mm (W)
Designed to be securely bolted down through your roof (bolts not included)
